Key properties
- 2-component, high solid system
- high film build
- good overall impact, chemical and heat resistance
Typical properties
- Pot life, 23°C [min] 60 – 80
- Solid content [%] 90±2 calculated
- VOC [g/l] ca. 130 calculated
Applications
general purpose industrial applications
Usage
All surfaces must be dry and before application dust, oil or dirt is removed by appropriate means. Pre treat ment by sanding is recommend to ensure proper adhesion.
| substrate material | pre-treatment | primer/activation |
| aluminium / steel | shot blasting / sanding | Fresh SA-1 activation |
| composite / gel coat | sanding with 80/120 grit | — |
| wood / MDF | sanding with 180 grit | DeraFLOW 100 primer |
The working temperature should be 20 24°C. The c uring agent is supplied with the resin part. Add the curing agent accordingly and mix the components well in the given ratio (mechanical mixing unit is recommended, approx. 300 rpm). The mixing ratio is given on the label.
After proper mixing use airless high pressure spray unit to apply product directly to prepared and cleaned surface.
- Nozzle size: 4 21 623
- Pressure : 160 180 bar
- Clean tools with acetone or equivalent.
The coated surface must be protected from direct water contact for 12 15 hours after application. The coating s urface is tack free after 15 hours depending on the conditions. The product will reach complete cure within 7 10 days at room temperature. Top c oat application sh ould be done between 1 6 72 hours.
Storage & Handling
Keep tightly capped when not in use. Handle in a well ventilated area. Store indoors at room temperature in the original containers kept tightly closed. Protect fr o m direct sun light. Detailed safety information is contained in the material data safety sheet.
